yokogawa tc10 l manual

Note: This filter will affect the measured value but also the control action the analogue retransmission and the alarms, Overall dimensions (L x H x D): 48 x 48 x 73 mm, This instrument is intended for permanent installation, for indoor. The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. The readout is updated every 15 minutes. The UT32A-V,-C,-R is an easily configurable single-loop controller for 1/8 DIN sized. There is no parameter for specifying the output direction. Line resistance: Automatic compensation up to 20W/wire with maximum error 0.1% of the input span. The factory default password for conguration parameters is equal to 30. Id like to confirm the parameters that can be set for TC10 RS485 communication setting criteria (protocol, baud rate, parity, stop bit, data length). What settings should I use to output PV transmission from ananalog output terminal on TC10? Moreover, provide indication that the. values and the controller output instantaneous value. condensation); 5. View and Download Yokogawa UT55A instruction manual online. The TC10L features universal - input, 3 Dynamic Colors Led Display two alarm outputs, retransmission output, a timer to count the total time the setpoint is exceeded, and a register to retain the Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), IP65 front panel (when the optional panel gasket is mounted)(optional), Power consumption: 4.5 VA max. External components (like zener barriers, etc.) Copyright 1994-2023 Yokogawa Electric Corporation. - Wiring should be installed to conform to NEC (National Electrical, Code: ANSI/NFPA-70) or the wiring construction standards in. Looking for more information on our people, technology and solutions? The readout is updated every 15 minutes. The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. Main Features Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals) 3 Dynamic Colors Led Display What is the I/O response time of the TC10? Range: When the code of the input type is equal to c (see paragraph How to order). The following, Calls attention to actions or conditions that could cause serious or, fatal injury to the user or damage to the instrument, and indicates, precautions that should be taken to prevent such occurrences. Note: Before starting the configuration code setting, please define and write down Cod1 and Cod2 as needed: Linear 0 to 20 mA (this selection forces Out 4 = TX), Linear 4 to 20 mA (this selection forces Out 4 = TX), Note: As default, when the alarms are active, only AL1 threshold, is available at "Operator Command" level to perform non, critical tasks. With the /GK suffix, the TC10 supports the IP65. OUTLINE DIMENSIONS (mm) 1.1 INSTRUMENT DIMENSIONS 1.2 PANEL CUT-OUT 65 mm min. Yokogawa TC10-L Temperature Controller Datasheet PDF, Yokogawa TC10-L Limit Controller Quick Reference Guide, Yokogawa TC10-L Temperature Controller Manual PDF, Yokogawa TC10-L Temperature Controller Brochure PDF, Yokogawa UT150L to TC10-L Cross Reference Guide PDF, Universal Input: (TC, mV, V, mA, Pt100-Pt1000), Limit control function (High limit / Low limit), Includes one digital input for external limit reset. There is minimum vibrations and no impact; 4. Calibration: According to EN 60751/A2. YOKOGAWA Manuals and User Guides All-Guides Database contains 857 YOKOGAWA Manuals (1264 Devices) for Free Downloading (PDF). Yes, if the input type is voltage or current. 0/4 to 20 mA input wiring for passive transmitter using the auxiliary pws. The TC10-L features universal input, 3 Dynamic Colors Led Display two alarm outputs, retransmission output, a timer to count the total time the setpoint is exceeded, and a register to retain the maximum temperature reached. If the other instruments have an SG terminal, how should I wire it? period. Digital indicating controllers (476 pages), Program temperature controller (37 pages), Temperature measurement module (44 pages), Manual will be automatically added to "My Manuals", Temperature Controller YOKOGAWA TC10 Engineering Manual, Temperature Controller Yokogawa TC10 Quick Manual, Temperature Controller YOKOGAWA TC User Manual, Temperature Controller YOKOGAWA UT55A User Manual, Temperature Controller YOKOGAWA UP150 User Manual, Temperature Controller YOKOGAWA XS550 User Manual, Temperature Controller YOKOGAWA UT130 Technical Information, Temperature Controller YOKOGAWA UT150 User Manual, Temperature Controller YOKOGAWA UT100 Series User Manual. IP65 rated as "dust tight" and protected against water projected from a nozzle when the optional panel gasket is mounted (for indoor locations) according to EN 60070-1. Nadcap AMS2750F - What's New and How to Comply? Related Manuals for YOKOGAWA TC10-L . We assume no liability for safety, or responsibility for, the product's quality, performance or functionality should users. US $17.58. This is a list of recorder and controller products that support the New Legislative Framework (NLF.). 4.Pay attention to the line resistance; a high line resistance may cause measurement errors. - For control relay output, alarm relay output, and power terminal, -N o C o o o D o F Temperature Controller, The TC10-N can be easily configured by the "Code Configuration" method for the most common requirements, just entering two 4-digit. A reinforced isolation must be assured by the external solid state relays. The cable length must not exceed 1.5 km at 9600 baud. Download Instructions manual of digitalview ALR-1400 Controller for Free or View it Online on All-Guides.com. - 0 to 12 V SSR Drive Output (OP4) connecting, - 12 Vdc (20 mA) transmitter power supply, connecting the 2 wire transmitter between, terminals 4 and 1; for 3 wire transmitter connect, terminal 4 to transmitter power supply input and. requirements of the area in which the instrument is being installed. countries or regions where wiring will be installed. fail to observe these instructions when operating the product. On burnout, it will be 0 mA. the protection provided by this instrument may be impaired. Can it output the SP setting value? For supply connections use No. The UT32A/MDL supports 920 MHz band wireless communication. The upper display will show PASS while the lower display shows 0; 2.Using and buttons set the value -481; 4.The instrument will turn OFF all LEDs for a few seconds, then the upper display will show dFLt (default) and then all LEDs are turned ON for 2 seconds. exposed terminals and wiring on the back. - Wiring should be installed to conform to NEC (National Electrical, Code: ANSI/NFPA-70) or the wiring construction standards in. Note: During the test, the instrument continues to operate at the measurement accuracy within specication. Can I use the DI function to switch between auto/manual and between run stop/start? Select a mounting location having the following characteristics: 2. What is the measured current of the TC10's RTD input? WARNING! any latin characters (a-z, A-Z) any numbers (0-9) special characters ("-", "_" and ". Copyright 1994-2023 Yokogawa Electric Corporation, {{ baseCtrl.fullNavList[baseCtrl.fullNavList[baseCtrl.currentMenuDepth].parent].name }}, {{ baseCtrl.fullNavList[baseCtrl.currentMenuDepth].name }}, Special Solutions of OpreX Transformation, Visual MESA Supply Chain Scheduling (VM-SCS), Visual MESA Production Accounting (VM-PA), Cloud Inventory Management Solutions (Web*VMI), Platform for Advanced Control and Estimation (Advanced Process Control), OpreX Laboratory Information Management System, Remote Plant Performance Operation and Remote Consulting (KBC Co-Pilot Program), Predictive Maintenance of Pump Cavitation, Advanced Analytical Instrument Management System (AMADAS), FluidCom Chemical Injection Flow Controller, Real-time Plant Data Sharing Service (Web*Technician), Digital Plant Operation Intelligence (DPI) Quality Stabilization System, OpreX Data Model Broker / Design Data Validation, OpreX Customer Service Management Software, OpreX IT/OT Security Operations Center (SOC), Plant Information Management System (Exaquantum), Alarm Reporting and Analytics (Exaquantum/ARA), Integrated Production Information (Exaquantum/mPower), Power Performance Calculations (Exaquantum/PPC), Safety Function Monitoring (Exaquantum/SFM), Operator Trending Module (Exaquantum/OTM), Remote Data Synchronization (Exaquantum/RDS), Synchronous OPC DA Manager (Exaquantum/SDM), Manufacturing Data Exchange (Exaquantum/MDX), Public announcement of Yokogawas products, Single-Cell Analysis Solution Single Cellome, Distributed Temperature Sensor - Fire Detection/Fire Prevention -, Industry and Interface Libraries (Applications and Interfaces), Advanced Control Bioreactor System BR1000, ALH for FlowCam: Automated Liquid Handling, Yokogawa announcement to Windows XP users regarding Systems products, A Business Value Decision ofImpact and Significance, Yokogawa Cloud IT/OT Connectors & Integrations, TC10-L Temperature Controller Limit Control Type Engineering Manual, TC10-L Temperature Controller Limit Control Type Serial communicaiton protocol, TC10-L Temperature Controller (Limit Control Type), Model TC10-L Temperature Controller (Limit Control Type), Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), Limit control function (High limit / Low limit), IP65 front panel (when the optional panel gasket is mounted)(optional). Power supply:100 to 240 VAC (-15 to +10% of the nominal value); Power consumption: 6.0 VA max. Current availability for non-stock parts is "Usually ships in 7-10 business days". the controller use can be found in the Engineering Manual: IM 05C01E81-02EN and the Communication Manual: IM 05C01E81-03EN. Notes: 1. Products and components that are subject to wear due to conditions. Is there a controller to which I can connect a 2-wire Pt1000 sensor? Configuration Page For: TC10 TEMPERATURE CONTROLLER TC10 TC10; Configuration Page For: TC10 Limit Controller TC10-L TC10-L; 21; Model: LL50A Parameter Setting Tool and PLC Ladder Building Tool Yes, by changing the DP setting from 0 to 1. Only wire the other instruments SG terminal. If the password is correct the display will show the acronym of the rst parameter group preceded by the symbol: ]. TC10-L is a panel mounting, Class II instrument. Do I need a minus sign ( - ) on the alarm setting value? CONTROLLER Engineering Manual. Notes: 1. - Do not short-circuit the terminals of the SSR output. The equipment wholly protected by double insulation or, - Whenever a failure or a malfunction of the device may cause dan-, gerous situations for persons, things or animals, please remember, that the plant must be equipped with additional devices which, - We warrant that the products will be free from defects in material. 1 to 4 indicate the status of outputs 1 to 4. If this instrument is used in a manner not specified in this manual. 4 2.4 SERIAL INTERFACE. All information about the controller use can be found in the Engineering Manual: IM 05C01E81-12EN and the Communication Manual: IM 05C01E81-13EN and General Specification: GS 05C01E81-11EN. The ambient temperature is in accordance with the operative, 6. Download digitalview ALR-1400 Instructions manual . AL on the front of the TC10 is the alarm lamp. - Install the power cable keeping a distance of more than 1 cm from, - The power cable is required to meet the IEC standards concerned or the. Installation altitude: less than 2000 m; The instrument can be mounted on panel with a maximum, When the maximum front protection (IP65) is desired, the optional, - 0 to 12 V SSR Drive Output (OP4) connecting, - 12 Vdc (20 mA) transmitter power supply, connecting the 2 wire transmitter between, terminals 4 and 1; for 3 wire transmitter connect, terminal 4 to transmitter power supply input and. The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. However, the instrument will only show the parameters applicable to its hardware options in accordance with the specic instrument conguration (i.e. Such, applications include nuclear power equipment, devices using, radioactivity, railway facilities, aviation equipment, air navigation. 2.Every change of the SEnS parameter will produces a change of the related parameter and in particular: [11] Ao1L and [12] Ao1H (when the analog retransmission is present) will be forced to the Ex.Range limits. When you do this, the upper limit range of 1000C becomes 999.9C. 1. A ladder sequence function is included as standard. When you do this, the upper limit range of 1000C becomes 999.9C. Does the TC10 come with a terminal cover? Allows to increase the value of the selected parameter. For SSR, mA and V outputs if the line length is longer than 30 m use a shielded wire. that no power is being supplied to a cable to be connected. TC10 TEMPERATURE CONTROLLER Engineering Manual Code: IM 05C01E81-02EN Third edition: Feb. 2018 Yokogawa Electric Corporation 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750 Japan www.yokogawa.com/ns 1. Use a tester or similar device to ensure. 1.Push the button for more than 3 seconds. : set points, proportional band, etc.). At this point you can set the operator. The ambient temperature is in accordance with the operative, 6. Use of the in-, strument in a manner not prescribed herein may compromise the, product's functions and the protection features inherent in the, device. Notes: 1. High Quality SDA25x30 Pneumatic SDA25-30mm Double Acting Compact AIR Cylinder. SSR outputs are not isolated. that no power is being supplied to a cable to be connected. The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. View online (36 pages) or download PDF (3 MB) YOKOGAWA TC10 User manual TC10 PDF manual download and more YOKOGAWA online manuals We assume no liability for safety, or responsibility for the, product's quality, performance or functionality should users fail to. Cold junction accuracy: 0.04C/C after a warm-up of 20 minutes. These two keys allow to return to the previous. The short depth of the controller helps save instrument panel space. Input impedance:> 1 M. 1, This instrument is intended for permanent installation, for, indoor use only, in an electrical panel which encloses the. It has been de- signed with compliance to the European Directives. Yokogawa Electric Corporation - TC10 - ENGINEERING MANUAL - PAG. View and Download Yokogawa TC10-L instruction manual online. - For control relay output, alarm relay output, and power terminal. Pay attention to the line resistance; a high line resistance may cause measurement errors. (limit control type) (150 pages), Programmable /indicating controller (96 pages), Digital indicating controller (108 pages), Digital indicating controllers (109 pages), Manual will be automatically added to "My Manuals", Controller YOKOGAWA TC 10-L Engineering Manual, Controller YOKOGAWA UT350 Instruction Manual, Controller YOKOGAWA UTAdvanced UT35A Technical Information, Controller YOKOGAWA Fluidcom S2 User Manual, Controller YOKOGAWA UT35A Operation Manual, Controller YOKOGAWA UT32A-R Operation Manual, Controller YOKOGAWA YS1000 Series User Manual, Controller Yokogawa FA-M3 System Upgrade Manual, Controller YOKOGAWA UT750 Instruction Manual. All information about. I selected SP value transmission on TC10, but no SP value is displayed. equipment and devices that ensure personnel safety. Note: The complete list of the default parameters is available in Appendix A. Set detailed parameter out group o1.F (output 1 function) = r.inP. Can I use the DI function to switch between auto/manual and between run stop/start? Burn out: full scale Calibration:According to EN 60584-1. Model TC10 Temperature Controller, Quick Guide, Model TC10 Temperature Controller, Engineering Manual, Model TC10 Temperature Controller, Serial communication protocol Modbus for TC10, New Legislative Framework (NLF) Conforming Products, List of RoHS (2011/65/EU) Directive Compliant Products (6-substances RoHS compliant products), Replacement Guide for TC10 Temperature Controller, The EU Declaration of Conformity TC10 *Log-in Required, Temperature Controllers 2D CAD *Log-in Required, Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), IP65 front panel (when the optional panel gasket is mounted)(optional). Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), Easy User Control for high limit or low limit, Timer (Counts the total time the setpoint is exceeded), Register to retain the maximum temperature reached, Serial communication: RS-485 Modbus (optional), IP65 front panel (when the optional panel gasket is mounted)(optional), Universal Input: TC, mV, V, mA, Pt100, Pt1000, Power consumption: 6.0 VA max. The EU Declaration of Conformity and the manual of the controller. AL on the front of the TC10 is the alarm lamp. Worked Time counter is continuously increased when, Overall dimensions (L x H x D): 48 x 48 x 73 mm, This instrument is intended for permanent installation, for indoor. Yokogawa Electric Corporation - TC10-L - ENGINEERING MANUAL - PAG. Use a tester or similar device to ensure. At this point the instrument restarts as for a new power ON. Can I output in the 100% direction (20 mA or more) upon burnout? (63% response when the input changes from 10% 90%).